Fast eddy Sports Important information about shipping and prices contained on Purchases page, please read....... All Prices listed and processed in U.S. Dollars - Fast eddy Sports

It’s about customer service first….

Important information about shipping and prices contained on Purchases page, please read……. All Prices listed and processed in U.S. Dollars

Updating...

British Customs

	JBQ-CCR Elbows Catalytic Converter Replacement Elbows are made specifically for your Triumph Thunderbird 1600/1700 for off road use. They are made from 304 stainless steel to last for many years. They fit all 2010 & newer Triumph Thunderbird models DOES NOT fit LT and Commander. Select Destination, Price with Shipping: Price: $43.00 Avg. Customer Rating: (2) Rate This item: Saved
	British Customs Predators for Thunderbird and Storm Not for sale in California./b> The Predator was designed to give your Thunderbird or Storm a radical "hooligan" look. Adds a bark and a sweet tone to your bike. This pipe will allow you to use with or without the Cat. Comes with Heat shield to dress up the junction point. Initial Dyno results in 4.5 BHP gain and 10.5 Torque! Available in black too! Click More Details below for video of the unfinished Prototype sound tests. Click More Information below to view Sound Clip and Drive By. Click shipping price below and select your destination for price with shipping included. More Details BC Predator Exhaust: Select Destination, Price with Shipping: Price: $769.00 Avg. Customer Rating: (10) Rate This item: Saved
	British Customs Hog Slayer: BC902-075-P NEW! Re-designed in 2016 for use with Catalytic Converter and stock MAP. Can be used without the CAT using aftermarket CAT-Bypass pipes e.g. JBQ stainless steel elbows and using TOR MAP (NOT for use in California or other locations where forbidden by law) Both options can utilize the stock heat shield! 2009-2016 Triumph Thunderbird 1600/1700/Storm Hog Slayer Exhaust System. Does NOT fit Commander or LT Looking for more power in sound and performance from your Triumph Thunderbird? British Customs Triumph has developed a stainless steel exhaust system that will make your Triumph Thunderbird 1600/1700 or Storm Come alive. The British Customs Hog Slayer Exhaust System is engineered with stainless steel construction, with Louvre core internals, creating proper back pressure. This Hog Slayer Exhaust is also shorter than the factory exhaust, tucking it in closer to the bike. Direct bolt-on installation means no additional modification is required, and everything required to install this exhaust system is included in your purchase. Features: * Stainless steel band clamps * Pair of Hog Slayer Exhausts * Polished 304 Stainless Steel * Louvre core internals * Deep throaty sound * Wakes up the bottom end of the bike, torque at the crack of the throttle * Smooth power delivery throughout the entire RPM range * Mechanical baffle (no repacking necessary) * Whole system only weights 20 lbs (stock system weights 33 lbs) * Proudly made in the USA * Direct bolt-on * Shorter than factory exhaust Click Additional Information below for Tune Mapping Numbers Click shipping price below and select your destination for price with shipping included. Select with CAT-Less JBQ Elbows for CAT-Less use of Hogslayers More Details THUNDERBIRD AND STORM MODELS THAT DON'T HAVE SECONDARY AI NEED TO USE MAP # 020363 STOCK 1600 MAP # 020306 1600 WITH BIG BORE AND 1700 MAP # 020310 NEW BC Hog Slayer Exhaust: Select Hogslayer Shipping Price: Price: $799.00 Avg. Customer Rating: (7) Rate This item: Saved
	DISCONTINUED FeS Custom Billet Exhaust Collars Thunderbird/Storm Currently Discontinued e-mail and I will put you on a list and if I get enough interest will get more made. New for the Thunderbird 1600 and Storm. After the header joint fell off my own Thunderbird, and left an ugly open joint I thought this would be a good place for a dress up piece! Made in USA of billet aluminum and anodized in black giving it a two tone finish like the jug on the engine. Price Includes Shipping US, select International shipping option from drop down menu below Select Destination, Price with Shipping: Price: $99.00 Avg. Customer Rating: (4) Rate This item: Saved
	Special / Sale Price - Powercommander V: Thunderbird 1600 Power Commander for the Thunderbird and Storm 2010-2014. Product description below. Thunderbird 1700 LT and Commander select below. Price Includes Free Shipping US, Overseas will be actual minus US Shipping and I will notify you by e-mail of total. Contact British Customs for map More Details The New Power Commander V is loaded with tons of new features. Below you will find some Power Commander V features. Reduced size from PCIIIusb (less than half of the size of PCIII) USB powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) Gear input (allows for map adjustment based on gear and speed) Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on PCIIIusb) Enhanced “accel pump” utility (increased adjustment and sensitivity ranges) NEW Power Commander V w/ Built in Ignition Control On select models, gain control over fuel delivery AND timing with the new Power Commander V with fuel and ignition control. The best of both worlds, now you can realize all the benefits of the Power Commander V and the Ignition Module 5 wrapped in a single enclosure. This Power Commander V is available for select twin cylinder engines. Retains all of the standard Power Commander V fuel control features Allows +/- 20 degrees of timing adjustment Map Switch Input – change maps on the fly Adjust timing per cylinder Raise your Rev Limit (only available on select models) Built In Launch Limiter. Price: $355.00 Price: $329.00 Avg. Customer Rating: (4) Rate This item: Saved
	BC Air Box Elimination Kit British Customs Thunderbird/Storm Air Box Elimination Kit Looking to boost the horsepower on your Triumph Thunderbird 1600 or Storm? British Customs has designed an Air Box Elimination kit that helps add up to 12.7* additional horsepower and 13 lbs./ft.* more torque. The Thunderbird’s stock induction system heavily restricts intake airflow because it breathes through a small passage located under the seat. British Customs Air Box Elimination kit removes the bulky, inefficient, plastic unit for a high flow K&N filter and a lightweight, aluminum battery box. The box is designed to secure all the nearby electrical components and has a place to fasten a DynoJet Power Commander. This kit is just one piece in the British Customs line of Thunderbird performance parts. The above power increases were generated using a complete engine package consisting of the British Customs Airbox Elimination Kit, British Customs Thunderbird Predator Exhaust, and a DynoJet Power Commander. Kit Includes: British Customs Battery Box K&N Air Filter K&N Crankcase Filter Air Filter Adapter Stainless Steel Hardware Features: Increased performance for the Thunderbird 1600 and Storm British Customs Battery Box Machined from Aluminum Durable Textured Black Powdercoat Finish High Flow K&N Filters Custom Power Commander Maps Available For Download Note: You must install a DynoJet Power Commander V with the British Customs Air Box Elimination Kit Results may vary Click HERE for ABE EFI Map for 1700 Storm engine* Click here for ABE Kit Installation Instructions US Shipping calculated at Check-out next page, International Select from drop down menu next to "Select Shipping Price" Select Destination, Price with Shipping: Air Box Elimination Kit Options: Price: $299.00 Avg. Customer Rating: (8) Rate This item: Saved
	Mock Monza Cap Gloss Black Brushed and Polished Stainless. The British Customs Mock Monza Gas Cap utilizes the factory vented gas cap thread to ensure proper modern ventilation while delivering that old school vintage look to your Triumph Modern Classic. Our Mock Monza Gas Cap replaces the OEM cap cover and easily screws on to your stock gas tank. A quick and easy do-it-yourself upgrade that gives your Triumph a truly vintage look, the British Customs Mock Monza Gas Cap is available in a sleek anodized black. For those looking for something flashier, take a look at our Stainless Steel Mock Monza Cap, part of our new decoration. Features: Gives a nostalgic look while maintaining the factory gas cap thread Easy to install Light-weight and durable Easy to repolish and buffer to keep the cap looking its best Select Price with Shipping and desired finish from drop down menus below Select Destination, Price with Shipping: Mock Monza Fuel Cap Finish: Price: $119.00 Avg. Customer Rating: (8) Rate This item: Saved

Shopping Cart
Your shopping cart is empty.
Product Search
Categories & Brands
- Categories | Brands
Product Specials

Mustang Classic One-Piece Seat: 76828

Triumph Scrambler, Thruxton, Bonneville, Bonneville T100 2001-17 & Bonneville SE 2012 Classic One-Piece Seat. This one-piece seat offers comfort while maintaining the style of the classic seat. Front Width: 11.5\" Rear Width 9\" Weight: 9 lbs Part Number: Note: Will not fit T120 models.
$320.00
$276.00